4.3 Absolute Color and Simple Compare Measurements
☛
If Absolute Color or Simple Compare measurements are to be stored in the instrument, refer to
Section 5 for selection procedure.
To take a measurement:
1) Press [FUNCTION] key to select
"ABSOLUTE COLOR" or "SIMPLE
COMPARE."
2) Position target window over
sample to be measured. Lower
the unit to the target window and
hold compressed.
"READING SAMPLE" is
displayed. Release unit after
"READING COMPLETE" is
displayed.
3) The measurement data is
displayed. The measurement data
can be viewed in Simple
Compare or Absolute Color by
pressing the [FUNCTION] key and
selecting function.
☛
The Simple Compare reference will be
overwritten if a QC function (i.e.; pass/fail,
etc.) is selected.
4-5
FUNCTION =
FUNCTION SETUP REF
ABSOLUTE COLOR
ABSOLUTE COLOR
SIMPLE COMPARE
E .95
FUNCTION SETUP REF
C* -.86
L* -.38
H* -.13
L*C*H*
C* -.86
L* -.38
H* -.13
PRESS
Sample
