Pass/Fail and 555 Shade Tag Measurements . . . continued
The display will show the last
measurement data with selected
setup and function.
4) Position instrument on sample to
measure.
5) Lower unit to target window and
hold compressed.
Release unit from sample after
"READING COMPLETE" is displayed.
☛
If an error message occurs during the
measurement, try reading sample again. If error
message still occurs, refer to Display Message in
Appendix B.
Passed sample using delta numbers
and pass/fail & 555 function
- 3 short beeps will be heard to
indicate passed sample.
- For shade "645", "6" represents the
"L" attribute, "4" represents the "a"
attribute, and "5" represents the "b"
attribute.
3-15
➩
545 S:2
FUNCTION SETUP REF
C* -.42
L* +.24
H* -.07
Target
Window
645 S:1
SAMPLE PASSED
645 S:1
L* +.44
C* -.42 H* -.05
