A SERVICE OF

logo

Open as PDF
next previous
1.5 Function Selection
There are five measurement functions that can be accessed by pressing
the "FUNCTION" key.
The "PASS/FAIL" and "555" functions are used for Textile QC operation
and are covered in Section 3.
The "SIMPLE COMPARE" and "ABSOLUTE COLOR" functions can be
used for scratch pad type measurements. These two functions are covered
in Section 4.
- The desired function is selected by repeatedly pressing the [FUNCTION]
key. The function name will display first, followed by the last
measurement data. The data will display approx. 2-1/2 seconds after
the key is released.
☛ The function data displayed will vary depending the Deltas option selected (see Section 7.1). Shown
below is the "Deltas=Numbers" setting which is the default.
FUNCTION =
FUNCTION SETUP REF
SIMPLE COMPARE
FUNCTION =
FUNCTION SETUP REF
ABSOLUTE COLOR
FUNCTION =
FUNCTION SETUP REF
PASS / FAIL
FUNCTION =
FUNCTION SETUP REF
555 SHADE TAG
FUNCTION =
FUNCTION SETUP REF
555 & PASS/FAIL
L*a*b*
a* +.00
L* +.00
b* +.00
L*a*b*
a* +.00
L* .00
b* -.00
L*a*b* S:1
SAMPLE PASSED
555 S:1
555 S:1
SAMPLE PASSED
E .00
a* +.00
L* +.00
b* +.00
L* +.00
b* +.00a* +.00
555 S:1 L* +.00
b* +.00
a* +.00
E .00
a* +.00
L* +.00
b* +.00
L*a*b* S:1
a* +.00
L* +.00
b* +.00
1-6