Tagging and Storing Operation (Optional) . . . continued
4) The bar code name should appear on
the first line of the display.
Tag All
- Press [REF] (yes) key if every
measurement that is to be stored
will receive the scanned tag. Press
[FUNCTION] (no) key to advance to
"TAG GROUP" option.
☛
"TAG ALL?" will not appear if any measurements
have previously been stored.
Tag Group
- Press [REF] (yes) if all measurements
in the selected group will have the
same scanned tag. Press [FUNCTION]
(no) key to advance to "TAG NEXT"
option.
☛
If a group is not named and "TAG GROUP" is
selected, the scanned tag name will take the place
of the data group # in the instrument.
"TAG GROUP" will not appear if any
measurements have previously been stored in the
group.
Tag Next
- Press [REF] (yes) if the measurement
to follow will be the only sample with
the scanned tag attached.
- A total of "6" tags can be attached
to each measurement. The total of
"6" tags includes combinations of
"ALL", "GROUP", and "NEXT" tag
selections.
WHITE SAMPLE
FUNCTION SETUP REF
no
yes
TAG ALL?
WHITE SAMPLE
FUNCTION SETUP REF
no yes
TAG GROUP
WHITE SAMPLE
FUNCTION SETUP REF
no yes
TAG NEXT?
E .05
L* -.04
b* +.00
a* -.04
5-8
➩
