Filter
Top Products
Item Indicator, button, or
connector
Icon Description
4 Video connector Allows you to connect a VGA display to the
system.
5 LCD menu buttons Allow you to navigate the control panel LCD
menu.
6 Information tag A slide-out label panel which allows you to record
system information such as Service Tag, NIC, MAC
address and so on as per your need.
7 LCD panel Displays system ID, status information, and system
error messages. The LCD lights blue during normal
system operation. The LCD lights amber when the
system needs attention, and the LCD panel
displays an error code followed by descriptive text.
NOTE: If the system is connected to a power
source and an error is detected, the LCD lights
amber regardless of whether the system is
turned on or off.
8 Hard drives Up to sixteen 2.5 inch hot-swappable hard drives.
9 vFlash media card slot Allows you to insert a vFlash media card.
10 USB connector Allows you to connect USB devices to the system.
The ports are USB 2.0-compliant.
11 USB management port/
iDRAC Direct
Allows you to connect USB devices to the system
or provides access to the iDRAC Direct features.
For more information, see the Integrated Dell
Remote Access Controller User’s Guide at
dell.com/esmmanuals. The USB management port
is USB 2.0-compliant.
12 Optical drive (optional) One optional SATA DVD-ROM drive or DVD+/-RW
drive.
13 Tape drive slot (optional) One optional 3.5 inch tape backup unit.
14 Quick Sync (optional)
Indicates a Quick Sync enabled system. The Quick
Sync feature is optional and requires a Quick Sync
bezel. This feature allows management of the
system using mobile devices. This feature
aggregates hardware/firmware inventory and
various system level diagnostic/error information
that can be used in troubleshooting the system.
For more information, see the Integrated Dell
Remote Access Controller User’s Guide at
dell.com/esmmanuals.
13