Filter
Top Products
Related videos
http://www.Dell.com/QRL/Server/PER730/Bezel
http://www.Dell.com/QRL/Server/PER730/iDRAC-QuickSync
Installing the front bezel
1. Hook the right end of the bezel onto the chassis.
2. Fit the free end of the bezel onto the system.
3. Secure the bezel with the keylock.
Removing the system cover
Prerequisites
1. Ensure that you read the Safety instructions.
2. Turn off the system, including any attached peripherals.
3. Disconnect the system from the electrical outlet and peripherals.
4. Remove the optional bezel. For more information see Removing the bezel.
Steps
1. Rotate the latch release lock counter clockwise to the unlocked position.
2. Lift the latch and rotate the latch toward the back of the system.
The system cover will slide back and the tabs on the system cover will disengage from the slots on
the chassis.
NOTE: The position of the latch may vary depending on the configuration of your system.
3. Hold the cover on both sides, and lift the cover away from the system.
56