Filter
Top Products
Figure 22. Removing and installing the hard-drive tray
1. hard-drive tray handle (2) 2. hard drive (4)
3. hard-drive indicator 4. SAS cable
5. backplane signal cable 6. backplane power cable
7. guide pin on the chassis (4)
Next steps
1. Replace the hard-drive tray. See Installing the hard-drive tray.
2. Follow the procedure listed in After working inside your system.
Installing the hard-drive tray
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
NOTE: Systems that support the internal hard-drive tray support low-profile heat sinks and do not
support a cooling shroud.
62