Filter
Top Products
Menu Item Description
list is attempted to boot. When set to Enabled, all hard disk devices are attempted
in order, as listed in the Hard-Disk Drive Sequence. This option is not enabled for
UEFI Boot Mode.
Boot Options
Settings
Configures the boot sequence and the boot devices.
Network Settings screen details
You can use the Network Settings screen to modify PXE device settings. Network Settings are only
available in UEFI boot mode. BIOS does not control network settings in the BIOS boot mode. For BIOS
boot mode, the network settings are handled by the network controllers option ROM.
You can view the Network Settings screen by clicking System Setup Main Menu → System BIOS →
Network Settings.
The Network Settings screen details are explained as follows:
Example
Menu Item Description
PXE Device n (n =
1 to 4)
Enables or disables the device. When enabled, a UEFI boot option is created for the
device.
PXE Device n
Settings (n = 1 to
4)
Allows you to control the configuration of the PXE device.
Integrated Devices screen details
You can use the Integrated Devices screen to view and configure the settings of all integrated devices
including the video controller, integrated RAID controller, and the USB ports.
You can view the Integrated Devices screen by clicking System Setup Main Menu → System BIOS →
Integrated Devices.
The Integrated Devices screen details are explained below.
Example
Menu Item Description
USB 3.0 Setting Enables or disables the USB 3.0 support. Enable this option only if your operating
system supports USB 3.0. If you disable this option, devices operate at USB 2.0
speed. USB 3.0 is disabled by default.
User Accessible
USB Ports
Enables or disables the USB ports. Selecting Only Back Ports On disables the front
USB ports, selecting All Ports Off disables all USB ports. The USB keyboard and
mouse operates during boot process in certain operating systems. After the boot
process is complete, the USB keyboard and mouse do not work if the ports are
disabled.
NOTE: Selecting Only Back Ports On and All Ports Off will disable the USB
management port and also restrict access to iDRAC features.
Internal USB Port Enables or disables the internal USB port. By default, the option is set to Enabled.
43