Filter
Top Products
103
Create Waypoint on Map
1. Use the arrow keys to move the cursor to the place where you want
to make a waypoint.
2. Press
WPT|WPT. The waypoint is saved and automatically given a
name with a sequential number, such as "waypoint 001." The waypoint
symbol and number appear on the map.
Create Waypoint by Entering a Position
1. Press WPT, then use → to select NEW as the Subcategory|ENT.
2. Press ↓ to
ENTERED POSITION|ENT|↑ to CREATE|ENT.
3. Press ↓ to
LATITUDE|ENT. Enter the latitude by pressing ↑ or ↓
to
change the first character, then press → to the next character and re-
peat until the latitude is correct. Press
ENT.
4. Press ↓ to
LONGITUDE|ENT. Enter the longitude by pressing ↑ or ↓
to
change the first character, then press →
to the next character and repea
t
until the longitude is correct. Press ENT, then EXIT|EXIT
to return to the
previous page display. The waypoint is saved and automatically given
a
name with a sequential number, such as "waypoint 001." The waypoin
t
symbol and number appear on the map and in the waypoint list.
Navigate To a Waypoint
Y
ou can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command. You, however, can avoi
d
scrolling the map to pick your waypoint if you use the Find Waypoint
commands:
1. Press
WPT|→ to SAVED|ENT. To look up the nearest waypoint, press
ENT or to look by name press ↓| ENT. For this example, look by name.
2. If your waypoint list is a long one, you can spell out the waypoint
name in the
FIND BY NAME box. Press ↑ ↓
to change the first character,
then press → to move the cursor to the next character and repeat until
the name is correct, then press
ENT to jump to the list below.