Filter
Top Products
64
1. From the Sonar Page, press
MENU|↓ to DEPTH RANGE|ENT.
Sonar Page menu with Depth Range command selected (left). The
Depth Range Control Scale (right).
2. The Depth Range Control Scale appears. Press ↑ or ↓ to select a dif-
ferent depth range. A dark bar highlights the selected range. Range
numbers in gray cannot be selected.
3. When the new range is selected, press
EXIT to close the menu.
Depth Range - Manual
Y
ou have complete control over the range when the unit is in the man-
ual mode. There are 12 depth ranges, from 5 feet to 800 feet.
To switch to Manual Depth Range:
1. Turn off automatic depth range. From the Sonar Page, press MENU|↓
to
AUTO DEPTH RANGE|ENT.
2. Press ↑ to
DEPTH RANGE|ENT and the Depth Range Control Scale ap-
pears.
3. Press ↓ or ↑ to select a different depth range. A horizontal dark ba
r
highlights the selected range.
4. When the new range is selected, press
EXIT to close the menu.
To turn Auto Depth Range on again:
1. From the Sonar Page, press MENU|↓ to AUTO DEPTH RANGE|ENT|EXIT.