Eagle Electronics 350 S/MAP SONAR User Manual


 
88
A
RROW KEYS – These keys are used to navigate through the menus,
make menu selections, move the map cursor and sonar chart curso
r
and enter data.
ENT – The Enter key allows you to save data, accept values or execute
menu commands. It is also used to create event marker icons.
EXIT – The Exit key lets you return to the previous screen, clear data
or close a menu.
W
PT – The Waypoint key is used to save and recall waypoints, search
for waypoints and access the waypoint list. It's also involved in some
navigation functions.
ZOUT (Zoom Out) – This key lets you zoom out the screen. On the So-
nar Page, it will allow you to see the full sonar chart display, showin
g
the entire water column from surface to bottom. On the Full Map dis-
play, this lets you see a larger geographic area on the display. Less de-
tail is seen as you zoom out.
ZIN (Zoom In) – This key lets you zoom in the screen. On the Sona
r
Page, it enlarges fish signals and bottom detail. On the Full Map dis-
play, zooming in lets you see greater detail in a smaller geographic
area on the display.
Power/lights on and off
To turn on the unit, press PWR. When the unit is powered up, the Full
Map GPS Page will be displayed. To switch between Sonar and Map
page options, press
PAGES| . To select a page, press to the Page
Name|
ENT.
To turn on the backlight, press
PWR
again. The unit has four backlight
levels to select from. Repeatedly pressing
PWR will cycle through the
backlight settings and turn off the backlight.
Turn off the unit by pressing and holding the
PWR key for 3 seconds.