Filter
Top Products
79
Sonar Simulator
This unit has a built-in simulator
that will allow you to practice as
though you were on the water. All sonar features and functions will be
useable during a simulation. When in simulator mode, you will see
[Simulator Mode] in the Sonar Page title bar. To use the simulator:
1. From the Sonar Page, press
MENU|MENU|↓ to SONAR SETUP|ENT.
2. Select
SONAR SIMULATOR ON and press ENT. If you want to simulate you
r
position, highlight SIMULATE POSITION and press ENT, which will turn on
the GPS Simulator.
NOTE:
If you turn on your unit before attaching a transducer, it may ente
r
a demo mode. The words demo mode flash on the bottom of the
screen and a sonar chart will play. Unlike the simulator, the demo
mode is for demonstration only and will automatically stop as soon
as you turn on the unit with a transducer attached. The simulato
r
will continue to function normally.
Stop Chart
If you are running multiple units on a boat, there are times when you
may want to turn off the sonar. This command turns off the sonar an
d
stops the chart from scrolling. Sonar restarts automatically each time
you turn on your unit.
Press
MENU|↓ to STOP CHART|ENT|EXIT.
To turn the sonar on again, repeat the step above.