Filter
Top Products
127
character and repeat until the name is correct. Press
ENT. To get back
to the main page display,
press EXIT repeatedly.
Waypoint Symbol
To edit waypoint symbol:
1. Press
WPT|ENT|ENT|↓ to waypoint name|ENT| → to EDIT SYM-
BOL
|ENT.
2. Use arrow keys to select desired symbol and press
ENT. To return to
the previous page, press
EXIT repeatedly.
Waypoint Position
To edit waypoint position:
1. Press
WPT|ENT|ENT|↓ to waypoint name|ENT|→ to EDIT POSI-
TION
|ENT.
2. Latitude: press ↓ to
LATITUDE|ENT. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lati-
tude is correct. Press
EXIT.
3. Longitude: press ↓ to
LONGITUDE|ENT. Press ↑ or ↓ to change the first
character, then press → to the next character and repeat until the lon-
gitude is correct. Press
EXIT.
4. When latitude and longitude are correct press
EXIT repeatedly to re-
turn to the main page display.
Selecting a Waypoint
To select a waypoint on the map (for navigating, editing, etc.,) use the
arrow keys and center the cursor over the waypoint. A halo will appea
r
around the waypoint.
Set a Waypoint by Average Position
This feature sets a waypoint at the current position after averagin
g
several position readings. This boosts waypoint position accuracy b
y
helping to eliminate errors caused by atmospheric conditions and othe
r
factors.