Filter
Top Products
38
Portable Sonar Installation
Like many Eagle products, the Cuda 350
sonar is capable of portable
operation. It uses the optional PPP-12 portable power pack.
The power pack and portable transducers expand the uses for your so-
nar. You can use your Cuda 350
sonar unit on your boat or take it to
the dock, on a float tube, on an ice fishing trip or use it as a second so-
nar in a friend's boat. (An alternative to the PPP-12 is the PPP-15
portable power pack, which was designed especially for ice fishing. It
includes a rechargeable gel cell battery
and a transducer designed fo
r
stationary use. The entire rig is contained in a carry bag that fits inside
a five-gallon plastic bucket.)
The PPP-12 package includes the power pack, battery adapter and a port-
able transducer. The transducer can be stored inside the power pack. The
PPP-12 requires eight AA alkaline batteries. Batteries are not included.
To use a portable power pack, you install the batteries
and then attach
the sonar unit to the power pack's bracket. Plug in the
power/transducer cable and you're ready to fish.
The PPP-12 has a quick-release mounting bracket built into the case.
Installing the Batteries
Release the latch on the front of the power pack case. Open the com-
partment and install eight AA batteries into the adapter. For the long-
est life, we recommend you use alkaline batteries.
NOTE:
When the unit is not in use, we recommend you unplug the powe
r
connector to reduce the possibility of corrosion or battery
drain.
When you store the unit, always remove the batteries because dea
d
batteries can leak and corrode the contacts.
A
fter installing the batteries, plug the cable's power connector into the
socket on the battery compartment cover. Route the cable's unit con-