Filter
Top Products
143
To correct this problem, track-up mode rotates the map as you turn.
What you see on the left side of the screen should always be to you
r
left, and so on.
A
nother option is course-up mode, which keeps the map at the same
orientation as the initial bearing to the waypoint. When either track-up
or course-up mode is on, an "N" shows on the map screen to help you
see which direction is north.
To change map orientation from the Map Page, press
MENU|↓ to M
A
P
ORIENTATION|ENT. Use ↑ ↓ to select the desired mode, then press ENT.
Press
EXIT|EXIT to return to the main page display.
Map Orientation selected on Map Menu (left).
North Up option selected on Map Orientation menu (right).
Overlay Data
To change the digital data shown on the Map, Sonar or Map with Sona
r
pages, press PAGES, then use ↓ ↑ to select the Full Map, Sonar or Map
with Sonar page and press
EXIT.
To select data for display:
1. From the Map, Sonar or Map with Sonar pages, press MENU|↓
to
OVERLAY DATA|ENT.
2. Use ↓ ↑ to select a Data Type, then press ← → to turn the data op-
tion on (check) or off (unchecked)
.