Filter
Top Products
setarchiving(8)
System Administration 127
-l audit-limit,non-audit-limit Sets the space limits for log archives in megabytes.
The option argument must consist of two values
separated by a comma.
The audit-limit value specifies the archive space limit
for audit logs. It must be either 0 (zero), unlimited
or an integer in the range of 500–50000. If you do not
use the -l option to modify the value of audit-limit,
the initial archive space limit for audit logs is
unlimited.
The non-audit-limit value specifies the archive space
limit for all other logs, in megabytes. It must be an
integer in the range of 500–50000. If unset, the initial
value for non-audit-limit depends on the type of server.
Use the showarchiving(8) command to determine
the value for your server.
If either of the specified values is invalid, the
command displays an error and exits without making
any changes.
-n Automatically answers no to all prompts. Prompts are
displayed.
-p password Sets the password used for ssh login. This option is
provided to facilitate scripting. To change the
password interactively, use the -r option.
-r Reads the password used for ssh login. The
setarchiving command displays a prompt and
reads the new password without echoing it to the
screen.
-t user@host:directory Sets the archive target. The host field specifies the host
name or IP address of the archive host. The user field
specifies the user name for the ssh login to the
archive host. The directory field specifies the archive
directory on the archive host where the archives
should be stored. The directory field must not begin
with a tilde (~).
-v Specifies verbose output. When this option is used in
conjunction with -k download, setarchiving
displays the downloaded public key in addition to its
md5 fingerprint.
-y Automatically answers yes to all prompts. Prompts
are displayed.