Fujitsu M4000 Life Jacket User Manual


 
shownetwork(8)
System Administration 369
EXTENDED
DESCRIPTION
When the XSCF unit is duplicated configuration in the high-end server, a
takeover IP address can be used without a need to determine whether XSCF has
been switched. By setting the LAN ports of the active XSCF unit as lan#0 and
lan#1, they can be accessed with the names lan#0 and lan#1. As default
values, lan#0 is set to xscf#0-lan#0 and lan#1 is set to xscf#0-lan#1.
In the midrange server, the value of the lan#0 is fixed with xscf#0-lan#0, and
the lan#1 is fixed with xscf#0-lan#1.
When the XSCF unit is duplicated configuration in the high-end server and
when the takeover IP address has been disabled by setnetwork(8) command,
nothing will be displayed even though the takeover IP address is specified by the
shownetwork(8) command.
The setnetwork(8) command configures a network interface used by the XSCF.
EXAMPLES
EXAMPLE 1 Displays the information for XSCF-LAN#0 on XSCF unit 0.
EXAMPLE 2 Displays the information for XSCF-LAN#1 on XSCF unit 0 in the midrange
server.
XSCF> shownetwork xscf#0-lan#1
xscf#0-lan#1
Link encap:Ethernet HWaddr 00:00:00:12:34:56
inet addr:192.168.10.11 Bcast: 192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:20241827 (19.3 MiB) TX bytes:2089769 (1.9 MiB)
Base address:0x1000
XSCF> shownetwork lan#1
xscf#0-lan#1
Link encap:Ethernet HWaddr 00:00:00:12:34:56
inet addr:192.168.10.11 Bcast: 192.168.10.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:54424 errors:0 dropped:0 overruns:0 frame:0
TX packets:14369 errors:0 dropped:0 overruns:0 carrier:0