Fujitsu M4000 Life Jacket User Manual


 
showaltitude(8)
System Administration 261
NAME showaltitude - display the altitude of the system and whether the air filter installed
SYNOPSIS showaltitude
showaltitude -h
DESCRIPTION The showaltitude(8) command displays the current settings for the altitude of
the system and whether the air filter installed.
Whether the air filter installed is displayed on the midrange servers only.
The displayed altitude value is a multiple of 100 meters.
Privileges You must have platadm or fieldeng privileges to run this command.
Refer to setprivileges(8) for more information.
OPTIONS The following option is supported:
EXTENDED
DESCRIPTION
The air filter is displayed only when it is installed. If the filter is not installed
nothing is displayed.
The setaltitude(8) command sets the altitude of the system and whether or
not the air filter installed.
EXAMPLES
EXAMPLE 1 Displays the altitude of the system, on a high-end server.
EXAMPLE 2 Displays the altitude of the system and whether the air filter installed, on a
midrange server.
EXIT STATUS The following exit values are returned:
SEE ALSO setaltitude(8)
-h Displays usage statement.
XSCF> showaltitude
1000m
XSCF>
showaltitude
1000m
Filter is installed.
0 Successful completion.
>0 An error occurred.