Fujitsu M4000 Life Jacket User Manual


 
showdscp(8)
312 SPARC Enterprise Mx000 Servers XSCF Reference Manual Last Revised January 2007
OPTIONS The following options are supported:
EXAMPLES
Caution The IP addresses shown in the following examples are examples only.
Refer to the site planning guide for your server for more information about valid IP
addresses for your network. Using invalid network IP addresses could, under
certain circumstances, make your system unbootable!
EXAMPLE 1 Displaying a Table of All DSCP IP Addresses
-d domain_id Displays an individual domain’s IP address.
-h Displays usage statement.
When used with other options or operands, an error occurs.
-p Generates parsable output.
-s Displays the Service Processor’s IP address.
-v Specifies verbose output. Prints additional information about
internal progress of the program’s operations to the screen.
XSCF> showdscp
DSCP Configuration
Network: 10.1.1.0
Netmask: 255.255.255.0
Location Address
---------- ---------
XSCF 10.1.1.1
Domain #00 10.1.1.2
Domain #01 10.1.1.3
Domain #02 10.1.1.4
Domain #03 10.1.1.5
Domain #04 10.1.1.6
Domain #05 10.1.1.7
Domain #06 10.1.1.8
Domain #07 10.1.1.9
Domain #08 10.1.1.10