Filter
Top Products
sethttps(8)
System Administration 177
■ In case the XSCF unit is duplicated configuration, the setting automatically
reflected to the standby XSCF. When there's a defect on the standby XSCF, it
leads to an error.
■ When using an external certification authority, it leads to an error in the
following cases.
■ When the "-c gencsr" option or the "-c enable" option is executed, without
executing the "-c genserverkey" option.
Create the private key of the web server using the "-c genserverkey"
option.
■ When the "-c enable" option is executed, without executing the "-c
importca" option.
Import a web server certificate using the "-c importca" option.
■ When the web server certificate which imported by executing the "-c
importca" option does not correspond to the private key of the web server
which has been created by executing the "-c genserverkey" option.
Confirm the validity of the web server certificate.
■ The information which has been set will be reflected by using the
rebootxscf(8) command to reset XSCF.
■ The details of the current HTTPS service can be checked by using the
showhttps(8) command.
EXAMPLES
EXAMPLE 1 Starts the HTTPS service.
EXAMPLE 2 Stops the HTTPS service.
EXAMPLE 3 Creates a CSR with the following settings: country: JP, state|province: Kanaga-
wa, locality: Kawasaki, organization: Example, organizationalunit: develop-
ment, common: scf-host, e-mail: abc@example.com
EXAMPLE 4 Createsthe self-certification authoritywith thefollowing settings, andcreates
a self-signed web server certificate:country: JP, state|province: Kanagawa, lo-
cality: Kawasaki, organization: Example, organizationalunit: development, com-
XSCF> sethttps -c enable
Continue? [y|n] :y
Please reset the XSCF by rebootxscf to apply the https settings.
XSCF> sethttps disable
XSCF> sethttps -c gencsr JP Kanagawa Kawasaki Example development
\ scf-host abc@example.com