Filter
Top Products
deleteboard(8)
36 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised January 2007
OPTIONS The following options are supported.
OPERANDS The following operand is supported:
EXTENDED
DESCRIPTION
■ When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
-c disconnect Detaches the XSB from the domain configuration and keeps it
assigned. If the -c option is omitted, "-c disconnect" is used.
-c reset Reserves disconnect of an XSB. If the -c option is omitted, "-c
disconnect" is used.
-c unassign Disconnects the XSB completely from the domain configuration
and puts it in the system board pool. If the -c option is omitted,
"-c disconnect" is used.
-f Forcibly detaches the specified XSB.
Note – If the -f option is used to forcibly add a system board to
a domain, all the added hardware resources may not work
normally. For this reason, use of the -f option is not
recommended in normal operation. If the -f option must be
specified, verify the status of every added system board and
device.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-n Automatically answers 'n' (no) to all prompts.
-q Suppresses all messages to stdout, including prompts.
-v Displays a detailed message. If this option is specified with the
-q option, the -v option is ignored.
-y Automatically answers 'y' (yes) to all prompts.
xsb Specifies the XSB number to be disconnected. Multiple xsb
operands are permitted, separated by spaces. The following xsb
form is accepted:
x–y
where:
x An integer from 00–15.
y An integer from 0–3.