Filter
Top Products
applynetwork(8)
20 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008
■ Unless all of the host name, DNS domain name, IP address, net mask, and
routing settings have been made, it results in errors. Please execute the
sethostname(8), setnetwork(8), and setroute(8) command to set all items,
then reexecute the applynetwork(8) command.
■ To set to multiple interfaces, all of the host name, DNS domain name, IP address,
net mask, and routing settings need to be set on every interface. In these
interfaces, if any of these setting items omitted, it results in errors.
■ To specify a host name, use the sethostname(8) command. To specify an IP
address and net mask, use the setnetwork(8) command. To specify routing, use
the setroute(8) command.
EXAMPLES
EXAMPLE 1 Reflects the information that has been set for the XSCF network.
On a midrange server:
XSCF> applynetwork
The following network settings will be applied:
xscf#0 hostname :hostname-0
DNS domain name :example.com
nameserver :10.23.4.3
interface :xscf#0-lan#0
status :up
IP address :10.24.144.214
netmask :255.255.255.0
route :-n 0.0.0.0 -m 0.0.0.0 -g 10.24.144.1
interface :xscf#0-lan#1
status :down
IP address :
netmask :
route :
Continue? [y|n] :y