Filter
Top Products
showdomainmode(8)
308 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008
Refer to setprivileges(8) for more information.
OPTIONS The following operands are supported:
EXTENDED
DESCRIPTION
■ If the Mode switch of the operator panel is set to Service, the settings of the
modes of operation for the specified domain have the following values,
regardless of the domain mode displayed by the showdomainmode(8) command:
■ OpenBoot PROM diagnostic level (Diagnostic Level), CPU operational
mode (CPU Mode): operates as the showdomainmode(8) command display
■ Host watchdog and suppress break signal reception (Secure Mode), auto
boot function (Autoboot): off
■ When the OpenBoot PROM environmental variable 'auto-boot?' has been set
to false, the auto boot function is disabled.
■ The setdomainmode(8) command sets the modes of operation specified for a
domain.
EXAMPLES
EXAMPLE 1 Displays the current state of the modes of operation set for domain ID 0.
EXIT STATUS The following exit values are returned:
SEE ALSO setdomainmode(8)
-d domain_id Specifies the domain ID of the domain to be displayed. domain_id
can be 0–23 depending on the system configuration.
-h Displays usage statement. When used with other options or
operands, an error occurs.
XSCF> showdomainmode -d 0
Host-ID :0f010f10
Diagnostic Level :min
Secure Mode :on
Autoboot :on
CPU Mode :auto
0 Successful completion.
>0 An error occurred.