Fujitsu M4000 Life Jacket User Manual


 
setnetwork(8)
System Administration 195
address Specifies an IP address. The specified value is a set of four integer
values delimited by the period (.). The following address form is
accepted:
xxx.xxx.xxx.xxx
xxx An integer from 0255. Zero suppression can
be used to specify the integer.
interface Specifies the network interface to be configured. One of the
following values can be specified:
For midrange server:
For XSCF unit 0:
xscf#0-lan#0 XSCF-LAN#0
xscf#0-lan#1 XSCF-LAN#1
xscf#0-if Interface between XSCF units (Inter SCF
Network; ISN)
For abbreviation:
lan#0 an abbreviation of XSCF-LAN#0
lan#1 an abbreviation of XSCF-LAN#1
For high-end server:
For XSCF unit 0:
xscf#0-lan#0 XSCF-LAN#0
xscf#0-lan#1 XSCF-LAN#1
xscf#0-if Interface between XSCF units (Inter SCF
Network; ISN)
For XSCF unit 1 (when a duplicated configuration is used):
xscf#1-lan#0 XSCF-LAN#0
xscf#1-lan#1 XSCF-LAN#1
xscf#1-if ISN
For takeover IP address:
lan#0 takeover IP address for XSCF-LAN#0
lan#1 takeover IP address for XSCF-LAN#1