Filter
Top Products
cfgdevice(8)
System Administration 27
OPTIONS The following options are supported:
EXTENDED
DESCRIPTION
■ When the command is executed, a prompt to confirm execution of the command
with the specified options is displayed. Enter "y" to execute the command or "n"
to cancel the command.
■ If connection or disconnection is made when the power supply of the system is
ON, settings are made immediately after cfgdevice(8) command execution.
When the power supply of the system is OFF, connection or disconnection is
reserved and settings are made after the power supply is turned on.
■ The DVD/tape connection is maintained even if the domain configuration is
changed, or a CPU/Memory Board unit (CMU) or I/O unit (IOU) is replaced
with a connected DVD drive/tape drive unit.
■ The DVD/tape connection is maintained even if the domain power is turned off
or the system is rebooted.
■ The DVD drive/tape drive unit is mounted in each of the base and expansion
cabinets in a high-end server that has the expansion cabinet. In such cases, each
DVD drive/tape drive unit can be connected only to a domain within the cabinet
in which the drive is mounted. Settings for connection must be made for both the
base cabinet and expansion cabinet.
-c attach Connects the DVD drive/tape drive unit to the specified port.
-c detach Disconnects the DVD drive/tape drive unit from the specified
port.
-h Displays usage statement. When used with other options or
operands, an error occurs.
-l Displays the current status of the DVD drive/tape drive unit
currently set up.
-M Displays text by page. This option provides a function that is
the same as that of the more command.
-n Automatically answers 'n' (no) to all prompts.
-p port_no Specifies the number of the port, in the specified domain, to
which the DVD drive/tape drive unit is to be connected.
port_no can be specified in the ’IOU number-PCI slot number’
format. The -p option cannot be omitted.
-q Suppresses all messages to stdout, including prompts.
-y Automatically answers 'y' (yes) to all prompts.
XSCF> cfgdevice -l
Current connection for DVD/DAT:
Main chassis: port 0-0