Filter
Top Products
1. OPERATION
1-27
QUIT[MENU]
[RX ADDRESSED MSG]*
I HAVE CHANGED MY
COURSE TO 350 DEGREE.
*RX BROADCAST MSG for
received broadcast message
[RECEIVED MSG]
POPUP : ALL
BUZZER : ON
1. Press any key to erase the message.
2. Press the MENU key to show the main menu.
3. Select MSG then press the ENT key.
4. Select RX LOG then press the ENT key.
Date and time
message received
("NEW" displayed for
unread message)
1/3[
T
] MSG[ENT] QUIT[MENU]
MMSI of sender
[RX LOG]
03/MAY 13:25 NEW
[UTC] FROM: 4310199111
28/MAR 03:43
[UTC] FROM: 431099111
22/MAR 18:00
[UTC] FROM: 431099111
5. To view the contents of a message, select
the message then press the ENT key.
The figure shown right is an example of a
received message.
6. Press the DISP key to close the log.
Automatically displaying incoming messages
You can display incoming messages automatically as follows:
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.
[USER SETTINGS]
KEY BEEP : ON
ALARM BUZZER : ON
AUTO SORT : ON
DISP SART TEST : ON
LONG RANGE
RECEIVED MSG
CPA/TCPA ALARM
NOTE: For INLAND AIS mode, the
USER SETTINGS menu has two
pages. See section 2.9 to 2.11.
3. Select RECEIVED MSG, then press the
ENT key.
4. Select POPUP, then press the ENT key