Filter
Top Products
2. INLAND AIS
2-26
2.10 Selecting Units of Measurement
You can select the units of measurement for distance, length and speed.
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.
3. Select RANGE CPA UNITS, SOG UNITS or LENGTH UNITS (on page 2)
as appropriate then press the ENT key. The options for each item are as
follows.
4. Select the desired unit then press the ENT key.
5. Press the DISP key to close the menu.
2.11 Setting for Time Difference
You can set the time differences from UTC (Universal Time Coordinated) to
show the local time. When you select UTC for the time display, [UTC] is shown
near the time indication. For local time, [LT] is shown.
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.
3. Select TIME DIFF (on page 2) then press the ENT key.
+
00:00
4. Select the desired time difference then press the ENT key. You can change
the value with ▲ or ▼, the digit with ► or ◄. The setting range is -14:00 to
+14:00. If you set the value outside the range, the error message appears
shown below. Press any key to close the message.
Error Message
5. Press the DISP key to close the menu.
NOTE: When there is no time data from GPS, days in a leap year may be
shifted.