Filter
Top Products
1. OPERATION
1-32
SAVE CHANNEL.
ARE YOU SURE?
YES NO
23. Press the MENU key. The prompt shown right
appears.
24. Press ◄ to select YES then press the ENT key.
Note: If a combination other than that shown in the table at step 13 is
selected, the message “ILLEGAL MODE WAS SELECTED PRESS ANY
KEY.” appears.
25. Press the DISP key to close the menu.
Note: If you enter invalid data, the message “OUT OF RANGE!: OO”
appears. Press any key to escape. Reenter data.
1.10 Enabling/Disabling Alarm Buzzer, Key Beep
You may turn on or off the buzzers that sound for alarms or incoming
messages. Further, you may turn off the beep, which sounds for valid key input.
Note that the alarm buzzer is not related to a radar or ECDIS alarm.
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.
[USER SETTINGS]
KEY BEEP : ON
ALARM BUZZER : ON
AUTO SORT : ON
DISP SART TEST : ON
LONG RANGE
RECEIVED MSG
CPA/TCPA ALARM
NOTE: For INLAND AIS mode, the
USER SETTINGS menu has two
pages. See section 2.9 to 2.11.
3. Select KEY BEEP or ALARM BUZZER as appropriate then press the ENT
key.
4. Select ON or OFF as appropriate then press the ENT key.
5. Press the DISP key to close the menu.
1.11 Long Range
The long range function sets how to reply to a request for own ship data from a
distant station (for example, an Inmarsat C station) and whether to transmit
your ship's position to a satellite via the AIS VHF communication link or not.
1.11.1 LR MODE (Long Range Mode)
The long range mode sets how to reply to a request for own ship data from a
distant station, for example, Inmarsat C station. You may reply automatically or
manually.
1. Press the MENU key to open the menu.
2. Select USER SETTINGS then press the ENT key.