Filter
Top Products
3. MAINTENANCE, TROUBLESHOOTING
3-13
3.9 Restoring Default Settings
You may clear all or specific settings to start afresh with default settings. When
all data is cleared, the default settings for all items in the INIT SETTING and
SYSTEM SETTINGS sub-menus are restored. GPS data is also cleared;
however, MMSI and IMO numbers, ship’s name and call sign are not cleared.
1. Press the MENU key to open the menu.
2. Select DIAGNOSTICS then press the ENT key.
3. Select MEMORY CLEAR then press the ENT key.
QUIT[MENU]
[MEMORY CLEAR]
MONITOR CLEAR
SET USER DEFAULT
GPS COLD START
4. Select MONITOR CLEAR, SET USER DEFAULT or GPS COLD START as
appropriate then press the ENT key.
MONITOR CLEAR: Restore default settings for dimmer, contrast
CPA/TCPA, key beep, audio alarm, and received
message alarm.
USER DEFAULT: Restores all settings to default, except items in the
INITIAL SETTINGS menu (MMSI No., IMO No., ship’s
name and call sign, etc.)
GPS COLD START: Clears GPS Almanac to receive latest Almanac.
MONITOR CLEAR.
ARE YOU SURE?
YES NO
SET USER DEFAULT
ARE YOU SURE?
YES NO
GPS COLD START.
ARE YOU SURE?
YES NO
MONITOR CLEAR USER DEFAULT GPS COLD START
5. Press ◄ to select YES then press the ENT key.
For MONITOR CLEAR and USER DEFAULT, a beep sounds then the
equipment restarts.