Filter
Top Products
AP-1
APPENDIX
Menu Tree - Class A AIS
MODE (STANDARD, MONITOR, SERVICE, DISABLE)
IP ADDRESS (000.000.000.000 - 255.255.255.255)
SUB NET MASK (000.000.000.000 - 255.255.255.255)
PORT NO. (0 - 65535)
IP ADDRESS (000.000.000.000 - 255.255.255.255)
SUB NET MASK (000.000.000.000 - 255.255.255.255)
NAVNET PORT NO. (10000 - 30000)
GATEWAY ADDRESS (000.000.000.000 - 255.255.255.255)
HOSTNAME (AIS0 - AIS9)
AIS OUTPUT (AUTO, CONTINUOUS)
GPS OUTPUT (AUTO, CONTINUOUS)
ZDA OUTPUT (AUTO, CONTINUOUS)
[MENU] key
MSG
SENSOR STATUS (Display sensor status.)
INTERNAL GPS (Displays data about internal GPS receiver.)
CPA (0.0-6.00 (NM))
TCPA (0-60 (min))
ALARM MODE (ON, OFF)
ALARM BUZZER (ON, OFF)
KEY BEEP (ON, OFF)
ALARM BUZZER (ON, OFF)
AUTO SORT (ON,OFF)
DISP SART TEST (ON, OFF
LONG RANGE
RECEIVED MSG
CPA/TCPA ALARM
(Continued on next page)
USER SETTINGS
INITIAL
SETTINGS
SET INT ANT POSN
A (0-511 (m))
B (0-511 (m))
C (0-63 (m))
D (0-63 (m))
SET MMSI (MMSI, IMO NO., NAME, CALL SIGN)
SET EXT ANT POSN
MODE (STANDARD, MONITOR, SERVICE, BEACON, DISABLE)
SPEED (4800BPS, 9600BPS, 19.2KBPS, 38.4KBPS, 57.6KBPS)
SET COM1 MODE (LONG RANGE, EXT DISPLAY, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM2 MODE (
EXT DISPLAY, MONITOR, HI LEVEL IF, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM3 (Same as SET COM2.)
SET COM4 MODE (SENSOR, EXT DISPLAY, DISABLE)
SPEED (IEC61162-1, IEC61162-2)
SET COM5 MODE (SENSOR(Fixed)
SPEED (IEC61162-1, IEC61162-2)
SET COM6 MODE (SENSOR(Fixed)
SPEED (IIEC61162-1, IEC61162-2, AD-10)
*
1
: For PC Network
*
2
: For NAVNET 3D
*
2
*
1
CREATE MSG
TX LOG
RX LOG
ADRS TYPE
(BROAD CAST, ADRS CAST)
MMSI
MSG TYPE (NORMAL, SAFETY)
CHANNEL
(ALTERNATE, BOTH A & B, A, B)
RETRY TIMES (0-3)
SET MSG TYPE
SET MSG
SEND MSG
POPUP (ALL, ABM, OFF)
BUZZER (ON, OFF)
SET I/O
PORT
SET
COM
PORT
SET PC
PORT
SET LAN
PORT*
SET PRIORITY
SET SHIP TYPE (Type no.)
A (0-511 (m))
B (0-511 (m))
C (0-63 (m))
D (0-63 (m))
Note: The INITIAL SETTINGS sub-menu
shown here is the one accessed with a
password, which permits changing of
settings. If accessed without a password,
in which case "SET" in a menu title is
replaced with "VIEW" and settings cannot
be changed.
LR MODE (AUTO, MANUAL)
MSG27 TX (ON, OFF)
* Shown when
optional LAN
kit is installed.
SET LR CH
CH-A
CH-B