Furuno FCR-21x9-BB Marine RADAR User Manual


 
4. AIS OPERATION
4-16
4.16.2 How to transmit a saved AIS message
If you have saved some previously transmitted AIS messages, you can edit one and
send it as follows.
1. Right-click the AIS mode indication then click [AIS Menu] to show that menu.
2. Open the [8 TRANSMIT MESSAGE] menu.
3. Go to page 2 of the menu, select [1 OPEN FILE] then select the number of the
message to transmit.
4. Select [3 EDIT] to edit the message.
5. To save the message, select [2 SAVE FILE].
6. To transmit the message, select [4 TRANSMIT MESSAGE]. You are asked if you
are sure to transmit the message. Click the [OK] button to transmit the message.
4.16.3 How to display received AIS messages
When you receive an AIS message, the Alert 539 "AIS Message Received" appears.
The message is displayed automatically or manually depending on a menu setting. To
display the message manually, click the AIS message button on the InstantAccess
bar.
How to display received AIS messages automatically
Right-click the AIS mode indication then click [AIS Menu] to show that menu. Go to
page 2 and set [1 AUTO DISP MESSAGE] to [ON]. Then, any received AIS message
is automatically displayed.
[AIS message]
button