Filter
Top Products
6. CHART OVERVIEW
6-15
6.6 Cursor Position Box
The Cursor position box shows
• Cursor position in latitude and longitude
• Time to go to the cursor position
• The bearing (True or Relative) and range to the cursor position, or x-y coordinates
of cursor position. Click the bearing and range indication or x-y coordinates indica-
tion to switch the indication, in the sequence shown below.
6.7 The Standby Mode
The standby mode deactivates the audio alarms from the chart display. Use it while in
harbour or other similar situation where use of the chart is not required. To go to the
Standby mode, click the [OTHERS] button on the Status bar then click [STANDBY].
To return to normal operation, click [Back to Normal Mode].
Cursor position, Time to go
to cursor position
Bearing(T) and range to cursor position
Bearing(R) and range to cursor position
x-y coordinates of cursor position