Filter
Top Products
SYSTEM CONFIGURATION
xxii
FCR-2839SW
RPU-013
RADAR
PROCESSOR
UNIT
Sub Display 1
Sub Display 2
Gyro Converter
GC-10
Gyrocompass
A-D Converter
Heading Sensor
LAN
Transformer
RU-1803
440 VAC
1ø, 50/60 Hz
200/380 VAC, 3ø, 50 Hz
220/440 VAC, 3ø, 60 Hz
Transformer
RU-5693
110 VAC,
3ø, 60 Hz
Transformer
RU-6522
220 VAC,
3ø, 50 Hz
Transformer
RU-5466
440 VAC,
3ø, 50 Hz
110-115/
220-230 VAC
1ø, 50/60 Hz
Category of Units
Antenna Unit: Exposed to the weather
All other units: Protected from the weather
ANTENNA UNIT
Chassis
RSB-104/105
Transceiver Unit
RTR-082
Performance Monitor
PM-51
Radiator
SN36AF (12 ft)
EC-3000
PROCESSOR
UNIT
Serial 1, 2
IEC-61162-2
(Gyro, AIS)
Serial 3 - 8
IEC-61162-1
(GPS, Log,
Echo sounder,
Wind, Alarm,
Navtex, etc.)
Digital Out 1 - 6
1: System Fail
2: Power Fail
3: Normal Close 1
4: Normal Close 2
5: Normal Open 1
6: Normal Open 2
Dashed lines indicate
optional or local supply
equipment.
VDR
Intelligent Hub
HUB-3000
100-115/220-230 VAC
1ø, 50/60 Hz
Sensor Adapter
*2
Radar Control
Unit RCU-025
OR
Trackball Control Unit
RCU-026
ECDIS Control Unit
RCU-024
OR
Radar Control
Unit RCU-025
OR
Trackball Control Unit
RCU-026
Monitor Unit
MU-231
*1
Digital In (ACK IN)
EPFS must meet MSC.112(73); SMDE must meet MSC.96(72). GPS speed data does not meet IMO
requirements unless type approved for compliance with IMO resolution MSC.96(72). The update rate of
the gyrocompass must be better than 40 Hz (HSC) or 20 Hz (other than HSC).
*1
The MU-231 monitor meets the Category requirements for CAT 1C and CAT 1HC. If a different monitor
is to be used on IMO vessels, its effective diameter must meet the applicable Category requirements:
CAT 1C and CAT 1HC: effective diameter 320 mm or higher
CAT 2C and CAT 2HC: effective diameter 250 mm or higher
For installation, operation and viewing distance of other monitor, see its manuals
*2
Control Serial MC-3010S, Analog IN MC-3010A, Digital IN MC-3020D, Digital OUT MC-3030D