Filter
Top Products
7. Vector Charts
7-58
Mariner page
Notes
Position: Check to show positions of Notes records with symbols on the chart.
Range: Check to circumscribe pilot data records with circles on the display.
The size of a circle depends on the value set in Notes.
Text: Check to show text of Notes records on the chart.
User chart
Points: Check to show user points on user charts.
Lines: Check to show lines on user charts.
Symbols, Tidals: Check to show symbols and tidals on user charts.
Areas: Check to show areas on the display. Color fill for the areas can be
chosen as transparent from 25 to 75% and as No color fill. If No color fill is
chosen, only the boundaries of the areas are visible.
Only radar part of Symbols, Lines and Areas: Check to display only those
Lines, Symbols and Areas that have user selection "on radar" activated for
them in the user chart. This is used to view only that part of the user chart that
will be sent to the radar connected to the system.
Manual Updates
Select to show manual updates with orange symbols.
Note: Visibility of manual updates made as true symbols are controlled
through Standard and Other pages of the Chart Display menu.
General page
Ship Outlines
Ship outlines: Select OFF or ON to show minimized or scaled symbol,
respectively.
True outline shown if:
(Beam width>6mm / Length>6mm), you can set whether width or length is
used to set limit for displaying true symbol.
AIS outlines: Select OFF or ON to show AIS targets in same size or scaled
symbol, respectively.
Velocity Vectors
Style: Select vector style, Conventional (simplified symbol), Std ECDIS
(minimized symbol).
Time Increments: Check to show ticks of velocity vector.
Note: This controls both own ship and targets ticks. If ticks are too tightly
spaced, they will be automatically removed from the display, until spacing
between ticks is sufficient to distinguish them separately. This depends on
display scale and speed of vessel/target.
Radar Antenna
Check to mark position of radar antenna (with "x".