Filter
Top Products
20. Alerts
20-8
Alert number 381: USER CHART: NEED POINTS /4
------------------------------------
USER CHART HAS MORE THAN 60 LINES OR
20 SYMBOLS AND IT DOES NOT CONTAIN
ANY POINTS. USE 'USER CHART' MENU
TO CHOOSE A VALID USER CHART OR ADD
POINTS TO CURRENT USER CHART
Alert number 382: USERCHART: FILE NOT FOUND /4
------------------------------------
CANNOT READ USER CHART IN MONITOR
MODE. MOVE USER CHART TO PLAN MODE
TO MAKE POSTPROCESSING AGAIN FOR
USER CHART.
Alert number 390: ROUTE: FILE READ ERROR /4
------------------------------------
CANNOT OPEN ROUTE IN MONITOR MODE.
OPEN ROUTE IN PLAN MODE TO MAKE SOME
MODIFICATION OF WP DATA IN WP PAGE.
FOR EXAMPLE CHANGE RADIUS OF ANY WP.
Alert number 391: ROUTE: FILE READ ERROR /4
------------------------------------
CANNOT READ ROUTE IN MONITOR MODE.
MOVE ROUTE TO PLAN MODE TO MAKE SOME
MODIFICATION OF WP DATA IN WP PAGE.
FOR EXAMPLE CHANGE RADIUS OF ANY WP.
Alert number 392: ROUTE: FILE NOT FOUND /4
------------------------------------
CANNOT READ ROUTE IN MONITOR MODE.
MOVE ROUTE TO PLAN MODE TO MAKE SOME
MODIFICATION OF WP DATA IN WP PAGE.
FOR EXAMPLE CHANGE RADIUS OF ANY WP.
Alert number 454: ROUTE: END REACHED /3
------------------------------------
YOU HAVE PASSED THE FINAL WAYPOINT
OF YOUR MONITORED ROUTE. CURRENT
MONITORED ROUTE HAS AUTOMATICALLY
CANCELLED
Alert number 457: ROUTE: OUTSIDE CHANNEL LIMITS /2/9
------------------------------------
SHIP IS OUTSIDE CHANNEL LIMITS
SPECIFIED FOR CURRENT LEG OF ROUTE.
CHECK SHIP POSITION AND ROUTE
Alert number 600: PARAM CHANGE DISABLED /3
------------------------------------
INSTALLATION PARAMETERS CANNOT BE
CHANGED IF THE ROUTE STEERING IS ON
OR THE KALMAN FILTER IS IN USE.
CHECK THE SITUATION AND TRY AGAIN.
Alert number 601 PARAM CHANNEL CONFLICT /4
-------------------------------------
IF IN INSTALLATION PARAMETERS THERE
ARE MORE THAN ONE DEVICE USING SAME
CHANNEL AND IF IN THAT CASE NO OTHER
DEVICES ARE ALLOWED FOR PARALLEL USE,
THEN ALERT 601 APPEARS.
NOTE: IN SOME SPECIAL CASE MORE THAN
ONE DEVICES CAN IN PARALLEL USE SAME
CHANNEL (FOR EXAMPLE LOG + DAX)