Filter
Top Products
9. Chart Alerts
9-7
9.3 How to Activate Own Ship Check
Calculation of own ship predicted movement area is done using watch sector from own ship position. Sector size is
defined by time and angle. To set them, do the following:
Function keys
Operation
X
Parameter backup
Digitizer
Backup and Restore
Installation parameters
C-Map Ed3 installation
Radar Initialize
Navigation parameters
X
Priority Alert
Chart Alert parameters
Optimization parameters
X
Print Navigation parameters
X
Print Optimization parameters
X
Selftest
Presentation Library
Access Server and Diagnostic
X
Close
1. Spin the scrollwheel to show Menu/Info/Chart menu in the guidance area
then push the left button.
2. Roll the scrollwheel to choose Initial Settings then push the scrollwheel.
3. Put the cursor in the Initial Settings dialog box to show the menu displayed
at left.
4. Spin the scrollwheel to choose Chart Alert parameters from the menu then
push the scrollwheel.
5. Click the Check Area tab.
6. Set the ahead time or distance and ahead width.
7. Click the X at the top right corner to close the dialog box.
NOTICE: Chart alert area is always referred to conning position.