Filter
Top Products
3-2
Table 3-1 External signal input connector (SPU Board)
Signal Name
Slave display
BRG signal
HDG signal
Speed log signal
Nav data
(L/L. WP, Time,
TDs, Course,
Depth, Water
Temperature)
Depth, Water
temp.
Conn. Name
—
to GC-10
from GC-10
NMEA-HDG
LOG
NAV 1
NAV 2
Conn. No.
J205
J207
J206
J208
J210
J202
J203
Conn. Type
NH, 8 pin
XH, 6 pin
XH, 5 pin
XH, 5 pin
XH, 3 pin
XH, 5 pin
XH, 5 pin
Connectable Equip.
Main radar
GC-8
GC-8, AD-10S, AD-100
C-2000
DS-30, DS-70,
MF-220, CI-60
GP-3100M2, GP-50M2,
GP-188, FCV series,
T-2000, TI-20
Remarks
AD-10 format
NMEA format
(Note 1)
200 pulses/nm, etc.
Note 1: HDT, VHW, HDG, HDM. NMEA-HDG connector also accepts, water temperature
and water depth data (in lieu of heading signal).
3.2 Output to External Equipment
Table 3-2 describes output connectors on the SPU Board.
J204 (SLAVE DISPLAY)
To FMD-811, etc.
NH-8P
J211 (EXT. ALARM)
For external buzzer,
NH3P
J202 (NAV OUT)
For navigator (plotter),
XH-5P
Figure 3-2 Location of output connectors on the SPU Board