Filter
Top Products
5-12
Video signal check
Selecting NORMAL and QV from the SET UP 2 menu, make sure the picture changes as
shown in the figure below. If not, adjust R120 and 121 again.
NORMAL video
QV video
Figure 5-11 Video signal check
Self test
Press [MENU], [0], [0], [0], [0], [2], [2] to run the self test. If NG appears for any ARP-
related item, check connections on the ARP Board.
FR-1505 SERIES TEST
Program No. 03591511**
ROM Check OK
RAM Check OK
Antenna Rotation 24RPM
Tx Trigger Frequency3000Hz
Video Level 000
Video Signal OK
ARP TEST
1. Program No. 18590411**18590421**
2. ROM Check OK OK
3. RAM Check OK
4. Speed Log OK 0.0 KT
5. Course OK
6. Trigger OK
7. Video Signal OK
8. Bearing Pulse OK
9. Heading Pulse OK
10. Minimum 0003
11. Scan Time 0274
12. Manual Acq. 00
13. Auto Acq. 00
14. FE-Data 1 0000
15. FE-Data 2 0000
Press MENU key to escape.
Press ENTER to check CRT.
Figure 5-12 Self test results