Filter
Top Products
5-9
Installation of ATA Board
1. Unfasten eight screws to detach the cover from the display unit.
2. Fasten the ATA Board to the chassis with seven screws.
Seven
screws
Figure 5-5 Display unit, right side view
3. Connect the cable assy. (supplied) between J107 on the SPU Board and J1 on the ATA
Board. Attach toroidal core to cable assy. Fasten cable assy. with cable tie.
J107
J1
Route cable
through here.
Toroidal Core
TFC-25-15-12
Cable Tie
CV-150
ARP-17
Board
Front Panel
SPU Chassis
SPU Board
03P9230
J107
J1
A
Toroidal Core
Cable Tie
Cable Assy.
Pass through
hole.
Exploded
View of
A
SPU Chassis
Inside
display unit
Figure 5-6 Display unit, top view