Filter
Top Products
5-14
J106
Figure 5-14 Display unit, top view
5. If applicable, connect autopilot to J1 with an XH5P connector. See the figure below for
details.
A
Square Bushing
J4
J1
Cable from
autopilot
From Autopilot
J103
J105
J104
J214
J102
Mini Clamp
Square
hole
(P) SPU
03P9230
J101
Attach clamp
(supplied);
pass cable
through clamp.
Exploded
view of A
B
Pass through
clamp.
Soldering
(see below)
From J1
Rear
Chassis
30 mm
Align flush
with chassis.
Exploded
view of B
20 mm
(1) Cut shrink tubing
in lengths of 20 mm;
slip tubing onto cores.
(2) Connect connector
to signal cable.
(3) Heat shring tubing
with soldering iron.
Shring Tubing
Twist and solder.
How to connect connector assy. to cable
Figure 5-15 Connection of autopilot