Filter
Top Products
Programming /
53
P0992639 01 Modular ICS Companion Installer Guide
When you have completed your programming session, press
. The display briefly reads End of session.
Viewing your programming updates
If any of the changes you have made to programming have not
immediately taken effect, you see an UPDATE display button
when you leave programming. The display shows you how
many telephones have not been currently updated due to the
system being busy with other programming or the telephone is
in use.
Press DNs to see the specific sets where programming changes
have not been updated. Items disappear from the list as they
are updated, and UPDATE disappears once all changes are
complete.
Template defaults
This section describes only the defaults that apply to
Companion programming. For all other default settings, refer
to Programming Record.
Note: (U.S. only). Before registering Companion portable
telephones you must first obtain and enter a certain
number of portable credit keys. Also keep in mind,
before the base stations can be recognized by the XC
system, you must obtain and enter a UTAM Activation
Key. Please refer to Software keys (U.S. only) on page
67 before setting up your wireless system.
Companion defaults
Setting Default
Startup defaults
MICS-XC template PBX
Start DN 221 (may be different for upgraded systems)