Filter
Top Products
Programming /
63
P0992639 01 Modular ICS Companion Installer Guide
After installing Norstar Companion components and obtaining
the proper number of UTAM activation keys (see Software
keys (U.S. only) on page 67), you need to verify that wireless
re-evaluation has occurred. Alarm code messages can be used
to indicate whether or not wireless re-evaluation has occurred:
Please refer to the Alarm and Event Code Manual for more
information on alarm messages and the actions that should be
taken to resolve any problems.
Re-evaluation Status
Press ≠ to see the Re-evaluation status. If the display
reads required, you can carry out the re-evaluation by
pressing CONTINUE and following the prompts.
Re-evaluation Schedule
This setting allows you to select whether to proceed or to
schedule the next Re-evaluation.
The default setting is Not scheduled. If you want to schedule
a re-evaluation, press CHANGE. You can begin re-evaluation by
pressing NOW, or schedule re-evaluation by pressing LATER.
You are prompted to enter a time and date.
Radios
Radio programming settings apply to base stations.
Alarm Definition Re-eval occurred?
21 Re-eval in progress No
22 Re-eval complete Yes
23 Cell configured.
Failed to come on line
No