Filter
Top Products
Automatic Privacy
Code: #304
Description:
Automatically prevents users with the same lines from joining
telephone conversations on a specific extension.
This feature is typically used for
extensions connected to fax
Valid Entries:
1
=
Assigned to extension
machines and modems, which ✓ 2 = Not assigned
make and receive data calls that
should not be interrupted.
Considerations:
A user can override Automatic Privacy with the Privacy feature
(p. 4-l0).
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 3 ] [ 0 ] [ 4 ]. The
display reads:
Auto Privacy
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 16, press [ 1 ] [ 6 ] . The display reads:
Auto Privacy 16
2 Not Assigned
3. To assign Automatic Privacy to the extension, press [ Next Data ] until the
display reads:
Auto Privacy 16
1 Assigned
To program another extension, press [ Next Item ] or [ Prev Item ] until the extension number
shows on the display. Repeat step 3.
✓
=
Factory Setting
To go to the next procedure: [ Next Proc ]
To go to a specific procedure: [ # ] [ x ] [ x ] [ x ]
To go to the previous procedure: [ Prev Preoc ]
(where XXX is the procedure number)
To return data to the factory setting: [ Remove ]
To exit system programming: [ Feature ] [ 0 ] [ 0 ]
System Programming 3-15