Filter
Top Products
FCC Information
Federal Communications Commission (FCC) Warning Statement
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manuals, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference, in which case the user will have to correct the
interference at his or her own expense.
FCC Notification and Repair Information
This equipment is registered with the FCC in accordance with Part 68 of its
rules. In compliance with those rules, you are advised of the following:
■
Means of Connection:
Connection to the telephone network shall be
through a standard network interface jack USOC RJ11C. These USOCs
must be ordered from your Telephone Company.
This equipment may not be used with party lines or coin telephone lines.
■ Notification to the Telephone Companies: Before connecting this
equipment, you or your equipment supplier must notify your local telephone
company’s business office of the following:
■ The telephone number(s) you will be using with this equipment.
■ The appropriate registration number and ringer equivalence number
(REN), which can be found on the right hand side of the control unit.
■ The facility interface code, which is 02LS2.
FCC Information C-1