Filter
Top Products
Doorphone 1 Extension Code: #604
Description:
You can connect up to two doorphones to the PARTNER Plus
A doorphone consists of a
system. Each doorphone can ring up to five other “alert” extensions. Use this
speaker and a button. It is usu-
ally placed near an entrance for
procedure to identify the extension to which the first doorphone is connected.
screening visitors.
Use procedure #605 to identify the second doorphone extension. Use pro-
cedure #606 to assign the alert extensions for both doorphones.
Valid Entries:
Extensions 11, 12, 13, 14, 15, 17, 18, 19, 20, 21, 23, 24,
25, 26, 27, 29, 30, 31, 32, 33
✓ None assigned
Considerations:
A doorphone extension cannot be a hotline extension at the
same time. Assigning a doorphone on a hotline (or other doorphone) extension
cancels the hotline (or doorphone) programming. However, hotlines and door-
phones can have the same alert extensions.
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 4 ]. The
display reads:
Door Phone 1
Data --
2. Enter the doorphone extension. For example, to select extension 21,
press [ 2 ] [ 1 ]. The display reads:
Door Phone 1
Data 20
Doorphone 2 Extension
Code:
#605
Description:
See the description for Doorphone 1 Extension (#604), above.
Doorphone 2 has a different ring from Doorphone 1.
Valid Entries:
Extensions 11,12, 13, 14, 15, 17, 18, 19, 20, 21, 23, 24,
25, 26, 27, 29, 30, 31, 32, 33
✓
None assigned
Considerations:
See the considerations for Doorphone 1 Extension (#604),
above.
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 6 ] [ 0 ] [ 5 ] . The
display reads:
Door Phone 2
Data --
2. Enter the doorphone extension. For example, to select extension 21,
press [ 2 ] [ 1 ]. The display reads:
Door Phone 2
Data 21
3-32 System Programming