Filter
Top Products
Last Number Redial
Feature Code:
05
Description:
Redials the last outside number dialed at the extension (maximum
20 digits per phone number). By programming this feature on a button, the user
can redial the number with one touch. System Speed Dial numbers cannot be
saved for redialing.
Programming Steps:
1.
2..
3.
4.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
Enter the extension to be programmed. For example, to program exten-
sion 31, press [ 3 ] [ 1 ] . The display reads:
PROGRAM EXT 31
Select a button to program by pressing any programmable button.
Press [ Feature ]. The display reads:
Conference Drop
LastNumberRedial
To program another feature on this extension, go to step 3 for that feature.
Feature Code:
06
Description:
Drops the last outside party added to a conference call without
disconnecting the other parties. By programming this feature on a button, the
user can use the Conference Drop feature with one touch.
Programming Steps:
1.
2.
3.
4.
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
Enter the extension to be programmed. For example, to program exten-
sion 18, press [ 1 ] [ 8 ]. The display reads:
PROGRAM EXT 18
Select a button to program by pressing any programmable button.
Press [ Feature ] [ 0 ] [ 6 ] . The display reads:
Drop
To program another feature on this extension, go to step 3 for that feature.
To erase a button setting, press the button to be erased and [ Mic ].
To program another extension, press [ Central Tel Prog ] and continue from step 2.
To go to system programming mode, press [ Central Tel Prog
] [ System Program ].
To exit centralized telephone programming, press [ Feature ] [ 0 ] [ 0 ] .
Centralized Telephone Programming 4-9