AT&T MLS-6TM Marine Radio User Manual


 
Recall
Feature Code:
03
Description:
Sends a timed switchhook flash over the telephone line. The user
may need to send a recall signal to use certain Centrex or PBX features, such
as Call Waiting. By programming this feature on a button, the user can send a
recall signal with one touch.
If users have problems with the
recall signal, you may need to
Programming Steps:
reset the Recall Timer Duration
(#l07).
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 19, press [ 1
] [ 9 ]. The dispIay reads:
PROGRAM EXT 19
3. Select a button to program by pressing any programmable button.
4. Press [ Feature ] [ 0 ] [ 3 ]. The display reads:
Recall
To program another feature on this extension, go to step 3 for that feature.
Save Number Redial
Feature Code:
04
Description:
Saves an outside phone number into temporary memory for later
Unlike Last Number Redial
redialing. The number stays in the memory until the user saves a new number.
(p. 4-9), this feature lets the user
By programming this feature on a button, the user can save the number with
make other calls before redialing
the saved number.
one touch and later dial it with one touch. System Speed Dial numbers cannot
be saved.
Programming Steps:
A phone can have more .Than one
Save Number Redial button.
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Prog ]. The
display reads:
CENTRAL TEL PROG
Extension:
2. Enter the extension to be programmed. For example, to program exten-
sion 21, press [ 2 ] [ 1 ]. The display reads:
PROGRAM EXT 21
3. Select a button to program by pressing any programmable button.
4. Press [ Feature
] [ 0 ] [ 3 ] . The display reads:
SaveNumberRedial
To program another feature on this extension, go to step 3 for that feature.
4-8 Centralized Telephone Programming