Filter
Top Products
Programming
Quick Reference
using a PARTNER display phone
SYSTEM SPEED DIAL NUMBERS
(p. 3-34)
Centralized Telephone
Programming and System
Speed Dial Numbers
PRESS [ Feature ] to enter system program mode
PRESS [ Feature
] followed by a 2-digit code (20 to 79)
DIAL the telephone number (up to 20 digits and special functions)
To include special functions in the telephone number
PRESS [ Transfer ] for Touch-Tone Enable
■
Perform these procedures at Extension 10,
(MLS-12D)
■ Place the Programming Overlay on the
phone's dial pad.
PRESS [ Mic ] to Stop dialing
NOTE:
When programming
PRESS [ Hold ] for Pause
emergency numbers (such as
PRESS [ Speaker ] for Recall
Speed Dial and Auto Dial
To mark a number (which overrides dialing
numbers) and/or placing test calls
to emergency numbers:
restrictions)
.
DIAL [ * ] before the telephone number
1.
To remove the number
DIAL the 2-digit code
2.
PRESS [ Mic ]
To leave program mode
Remain on the fine and briefly
explain to the dispatcher the
reason for the call before
hanging up.
Perform such activities in the
off-peak hours, such as early
morning or late evening.
CENTRALIZED TELEPHONE PROGRAMMING
TO ENTER PROGRAM MODE
TO PROGRAM ANOTHER FEATURE
TO ERASE A FEATURE OR AUTO
1. PRESS [ Feature ] [ 0 ] [ 0 ]
AT THE SAME EXTENSION
DIAL BUTTON
2. PRESS [ System Program ] [ System Program ] [ Central Tel Program ]
After you finish changing a setting, simply
1. PRESS the programmed button
continue with the instructions in the box
3. DIAL the extension number to be preprogrammed
2. PRESS [ Feature ] [ 0 ] [ 0 ]
shown for the new feature on this page
Buttons on which lines are assigned for the extension light up to
TO CHANGE SETTlNGS FOR
TO LEAVE PROGRAM MODE
show the current tine Ringing setting; remaining
buttons can be
programmed with Auto Dial numbers or features
ANOTHER EXTENSION
1. PRESS [ Feature ] [ 0 ] [ 0 ]
1. PRESS [ Central Tel Program ]
2. DIAL the number of the new extension
NOTE:
Program Auto-
matic Line Selection first
AUTOMATIC LINE SELECTI0N
(p. 4-3)
EXCLUSIVE HOLD
(p. 4-7)
PRESS a programming button
PRESS [ Feature ] [ 0 ] [ 2 ]
PRESS [ * ] [ * ]
PRESS the the/intercom buttons in
the desired order
I
PRESS [ * ] [ * ]
I
RECALL
(p. 4-8)
PRESS a programming button
PRESS [ Feature ] [ 0
] [
3
]
LINE RINGING
(p. 4-4)
PRESS each line button until the
desired ringing option appears
in the display
I
PERSONAL SPEED DIAL
NUMBERS
(p. 4-5)
PRESS [ Feature ]
DIAL a 2-dgit code (80 to 99)
DIAL the telephone number (up to 20
digits and special functions)
See System Speed Dial
Numbers for special functions
I
I
PRESS [ Intercom ] [ 6 ]
I
PRESS [ Intercom ] [ 6 ] [ 6 ]
I
I
I
AUTO DIALING-INSIDE AND
0UTSIDENUMBERS
(p. 4-6)
CONFERENCE DROP
(p. 4-9)
PRESS a programming button
PRESS [ Feature ] [ 0 ] [ 7
]
PRESS a programmable button
I
PRESS [ Intercom ] [ 7 ] [ 0 ]
To program an outside number:
DIAL the number
I
To program an extension:
PRESS left [ Intercom ]
PRESS the ext #
I
I
DO NOT DISTURB
(p. 4-7)
PRESS a programmable button with
lights
PRESS [ Feature ] [ 0 ] [ 1 ]
SAVE NUMBER REDIAL
(p.
4-8)
PRESS a programmable button
PRESS [ Feature ] [ 0 ] [ 4 ]
I
LAST NUMBER REDIAL
(p. 4-8)
PRESS a programmable button
PRESS [ Feature ] [ 0 ] [ 5 ]
PRIVACY
(p. 4-10)
PRESS a programmable button with
lights
PRESS [ Feature ] [ 0 ] [ 7 ]
TOUCH-TONE ENABLE
(p. 4-10)
PRESS a programmable button
PRESS [ Feature ] [ 0 ] [ 8 ]
MESSAGE LIGHT ON
(p. 4-11)
PRESS a programmable button
PRESS [ Feature ] [ 0 ] [ 9 ]
I
MESSAGE LIGHT OFF
(p. 4-1 1)
PRESS a programmable button
PRESS [ Feature ] [ 1 ] [ 0 ]
CALL PICKUP (
p. 4-12)
PRESS a programmable button
DIAL the extension number
PICKUP GROUP
(p. 4-12)
PRESS a programmable button
LOUDSPEAKER PAGING
(p. 4-13)
PRESS a programmable button
CALLING GROUP
(p. 4-13)
PRESS a programmable button
PRESS [ Intercom ] [ 7 ] [ 1 ]
For System Programming, see next page.
☛