Filter
Top Products
2. WIRING
2-31
Connection
MC-3020D/3030D
Input method (MC-3010A only)
Select the method of the analog data input, power voltage or power current.
Note 1: The input must not exceed the range of the input voltage, to prevent malfunc-
tion.
-Setting for voltage input: -10V to +10V or 0 to 10V (depending on the setting)
-Setting for contact input: Voltage 4mA to 20mA.
Note 2: When changing the input method, turn off the MC-3010A and on again to put
change in effect.
J1
J1
J2
J2
J4
J4
J5
J5
J3
J3
MC1.5-W-L cable
MC1.5-W-L cable
TTYCS-1/
TTYCSLA-1
TTYCS-1/
TTYCSLA-1
IV-1.25sq. (Local supply)
IV-1.25sq. (Local supply)
Note: Fasten the cable shield with the cable clamp.
For TTYCSLA cables, pass
the drain wire through the
shrink tube, then attach
these crimp-on lugs and
screws to connect drain
wires to here.
J1
J1
J2
J2
J4
J4
J5
J5
J3
J3
MC1.5-W-L cable
MC1.5-W-L cable
MPYC-12
MPYC-12
IV-1.25sq. (Local supply)
IV-1.25sq. (Local supply)
J6
J6
Note: Fasten the cable shield with the cable clamp.