Filter
Top Products
APPENDIX 2 ROD TERMINALS
AP-4
MC-3010A MC-ANALG Board (24P0115)
*: For pin #3 and 4, no cable is connected. However the jumper connection is necessary depend-
ing on the input specification.
Connector # Pin # Signal name Rod terminal to use Connected cable
J1
1 24V_IN AI 0.34-6 TQ (blue)
MC1.5-W-Lxxx
2 24V_GND
3 MODBUS-A AI 0.14-8 GY (gray)
4 MODBUS-B
5GND
Connector # Pin # Signal name Rod terminal to use Connected cable
J2
1 24V_OUT AI 0.34-6 TQ (blue)
MC1.5-W-Lxxx
2 24V_GND
3 MODBUS-A AI 0.14-8 GY (gray)
4 MODBUS-B
5GND
Connector # Pin # Signal name Rod terminal to use Connected cable
J3*
1 AN1_IN AI 0.75-6 GY (gray)
TTYCS-1
TTYCSLA-1
2 AN1_GND
3 CURR1_JP1
4 CURR1_JP2
Connector # Pin # Signal name Rod terminal to use Connected cable
J4*
1 AN2_IN AI 0.75-6 GY (gray)
TTYCS-1
TTYCSLA-1
2 AN2_GND
3 CURR2_JP1
4 CURR2_JP2
Connector # Pin # Signal name Rod terminal to use Connected cable
J5*
1 AN3_IN AI 0.75-6 GY (gray)
TTYCS-1
TTYCSLA-1
2 AN3_GND
3 CURR3_JP1
4 CURR3_JP2